Please make a selection below

Miller is one of the largest manufacturers of self-propelled sprayers, which includes the proven Nitro and Condor series.

Miller equipment include:

Miller Nitro 6365

Featuring a revolutionary new propulsion system that sets the highest standard for power to the ground performance.

Revolutionary propulsion system
The all-new Miller NITRO 6365 features an innovative electronically controlled twin hydrostatic Sauer Danfoss pump system with electronically controlled variable displacement piston drive motors and Farifield Torque-Hub® planetary final drives seamlessly integrated to provide optimum drive performance.

New planetary final drives
The new Torque-Hub® planetary final drives deliver high torque and long life, designed to optimise the performance of the NITRO 6365.

Greater torque at all speeds
The new wheel motors provide greater torque at all speeds. From starting out at a standstill and right up to full transport speed, the wheel motors will have the benefit of full torque at all times.


Miller Nitro 5000 series

With a wide range of models, horse power options, tank sizes, boom widths, four-wheel steering option, and precision technology available, there is an ideal Miller Nitro 5000 series for your demanding operation.

  • 4,500 – 6,100 litre models
  • Up to 400hp
  • 1.8m of ground clearance allows for late season spraying in tall crops
  • Front cab boom configuration allows a commanding view of the entire operation. Watch every nozzle and navigate every obstacle without looking back
  • High clearance and safe, pressurised with charcoal filtration SprayView cab keeps out air-borne chemical contamination in the operation environment
  • Quick-Attach provides maximum asset utilisation – spray or swath or spray while swathing.

Miller Condor GC Series

The all-new Miller Condor GC Series sets a new standard for refined productivity.

  • 3,800 or 4,500 litre sprayer
  • Low fuel consumption and minimal maintenance costs
  • Optional cutting edge Miller Spray-Air air boom technology available
  • Multiple 12 volt access points throughout SprayView cab for multiple electronics
  • New armrest console for convenient fingertip controls
  • Front mounted ladder


Miller Nitro Swather Adaptors

Turn your sprayer into a swather. Leverage the Miller Quick-Attach feature to enjoy the benefits of the most productive sprayer one day, and a swather the next.

Simply remove the Miller spray boom and attach the Miller Swather Adaptor. In minutes, you are ready to start swathing your small grains or canola. Swather adaptors are available for select Honeybee and MacDon series swather heads, and require the Miller Nitro be equipped with the Quick-Attach feature.


Miller Nitro N2XP

The mid-size Miller Nitro N2XP is a versatile sprayer designed to meet the needs of both farm operators and custom applicators. This sprayer is an ideal fit for most specialized row crop applications due to its unique wheel spacing configurations.

The ability to hydraulically change the wheel spacing from 1.8m to 3m allows the operator to perform in an almost limitless array of crop configurations.

This is enhanced with the optional 4-wheel steering that reduces the 5.49m turning radius down to a mere 3.05m to reduce crop damage at headlands or to ensure the front and rear wheels stay in the same track in tight headlands.


Miller Spray Air Technology

Less drift, less water, more coverage!

The air blast penetrates the thickest crop canopies and drives the droplets deep for unsurpassed coverage.

When coverage is critical and you need deep canopy penetration to kill the target pest - be it weed, disease, or insect - look no further than to Miller’s Spray-Air air boom technology.

The unique air nozzle spray system puts instantaneous control of droplet size, spray pattern, and the speed of the air blast spraying into the crop right at your fingertips. There is no other technology available that will give you coverage as good as this, with the lowest application rates possible.

Available for both current Miller Nitro and Condor sprayers (excluding Nitro N2XP), the Miller Spray-Air air boom technology improves your application efficiency and generates a superior return on your investment!

How the Miller Spray-Air technology works

One nozzle does it all!  Fine droplets for coverage...Coarse droplets to manage drift; control at your fingertips.

The Air Nozzles, spaced every 10” along the air boom, atomises the spray droplets using Dial-A-Drop™ technology. This creates the optimum-sized droplets that are not affected by speed and pressure changes, ensuring a uniform application over the entire field.

The Air Nozzle blasts the spray droplets deep into the crop canopy, ensuring complete top-to-bottom leaf surface coverage. No other application technology can measure up to the total plant coverage from the Spray-Air nozzle.

Because of the smaller controlled droplets and directed air blast, the Air Nozzle allows for a very efficient use of water, often in the range of 2 to 5 gallons per acre for herbicides, and generally from 5 to 10 GPA with fungicides.

Droplet Size Management

Spray-Air Technology - Enhanced Coverage, Superior Control, Maximum Efficiency

Maximise Productivity. The superior plant coverage from the use of the Air Shear Nozzle enables you to use only the minimum amount of herbicide required, and no more.
Lowest Water Volumes. Use the lowest possible carrier volumes for herbicide, desiccant, insecticide, and especially fungicide applications.
Fungicide Applications That Work. Simply stated, the Spray-Air technology is proven to be the best method to apply fungicides for superior disease control! Benefit from dense canopy penetration and total plant coverage.
Application Versatility. Three application methods to choose from:

  • Spray-Air Air Nozzle application to maximise coverage and efficiency
  • Conventional flat fan nozzles for higher volume applications over 10 gallons per acre
  • Use conventional nozzles + air blast from the Air Nozzle for classic Air Assist to maximise coverage in higher volume applications

Environmental Stewardship. Spray-Air owners practice environmental stewardship by using only as much chemical and water as required, reducing soil and water carryover of crop protection products.


McIntosh & Son is an authorised dealer for Miller sprayers. New sales of Miller sprayers are available in Western Australia at these branches: Albany, Geraldton, Katanning, Kulin, Merredin, MooraWongan Hills and in Queensland at Dalby. McIntosh & Son can arrange delivery of pre-owned (used) machines anywhere in Australia. Browse our used machine inventory here.

McIntosh & Son offers a comprehensive, friendly and professional one-stop shop service. We are committed to our customers and  aim to provide easy and quick access to sales of new and used Miller sprayers, quality service and parts.

To order or find out more information, contact a McIntosh & Son branch today.

Our Branches
WA Branch


(08) 9847 4255


(08) 9071 1155


(08) 9960 5500


(08) 9821 7000


(08) 9880 2556


(08) 9041 1099


(08) 9651 1488


(08) 9475 1600

Wongan Hills

(08) 9671 1300

QLD Branch


(07) 4662 2288